| 摘要: |
| 某型号高强度钢薄壁细长圆筒体加工过程中出现变形，尺寸和形状位置精度难以保证，通过自制尾座四爪卡盘、自制顶板、自制螺纹胎具等措施，解决了圆筒体加工中的变形问题，取得了较理想的效果。 |
| 关键词: 薄壁细长圆筒体 加工方案 加工变形控制 |
| 基金项目: |
|
| Machining Plan for High Strength Steel Thin-wall Small Diameter and Long Cylinder Body |
|
Wang Chunzhen
|
|
Jiangbei Machinery Engineering Co.Ltd., Xiaogan 432000
|
| Abstract: |
| Precisions of size, form and position are difficult to ensure, due to the deformation of high strength steel thin-wall small and long cylinder body in the processing. The processing problems are resolved by using self-made tail four-jaw clamp, top plate and thread die, which gain ideal effects. |
| Key words: thin-wall small diameter and long cylinder body machining plan deformation control |
