| 摘要: |
| 通过采取离心涂覆的方式，对天线罩内表面进行隔热涂料涂覆，以使其能满足隔热的要求和使用性能。结果表明：按照确定的离心涂覆参数，对天线罩内表面进行隔热涂料涂覆后，涂层在常温和400℃后附着力达到1级，涂层厚度为0.7～0.9mm，均匀性好，400℃30s时内部隔热温度60℃，涂覆完隔热涂料的天线罩满足使用要求。 |
| 关键词: 天线罩 隔热涂料 离心涂覆 |
| 基金项目: |
|
| Research on Heat Insulation Coatings Centrifugal Coating of Radome |
|
Jiang Haifeng Zhao Li
|
|
Shanghai Institute of Radio Equipment, Shanghai 200090
|
| Abstract: |
| Discuss using heat insulation coatings on radome inside surface by centrifugal coating, to satisfy heat insulation requirement and using performance. It is indicated that the attachment of coatings up to 1 class under normal temperature and 400℃ high temperature. The thickness of coatings is 0.7～0.9mm and the filmuniformity is good. When the outside temperature of heat insulation coatings up to 400℃ and holding 30 second, the inside temperature is 60℃. The transmission efficiency and boresight error of radome with heat insulation coatings satisfy using requirement. |
| Key words: radome heat insulation coatings centrifugal coating |
