摘要: |
根据异形件的结构特点,针对传统成形压模工艺装备结构单一、不可互换等问题,提出可调式的成形压模优化设计方案。使用三维建模软件对可调式成形压模优化后的结构进行实体建模,得到压模装配结构示意图。生产实践表明,该可调式成形压模成形效果良好,能实现压模的一次安装完成多种异形件的压制成形,降低了生产成本,为可调式压模设计提供有价值的参考。 |
关键词: 异形件;可调式;压模 |
基金项目: |
|
Research of Adjustable Forming Die Technique |
Chen Xia Ren Jinping Niu Yongjin Yang Hui Cui Yanhua Zhao Zhenwu
|
Changzhi Qinghua Machinery Factory, Changzhi 046012
|
Abstract: |
According to the structure of the profiled parts, the design scheme of forming die model is put forward in view of the problem of single, non-interchangesble design of traditional forming die technology. Three-dimensional modeling software is used to model the structure of the adjustable forming model, and the structure of the die assembly structure is obtained. Producing practice shows that the forming effect of the adjustable forming die is good, and can realize the press forming of various special-shaped pieces by once installation and reduce the production cost. It provides a valuable reference for the adjustable die design. |
Key words: the profiled parts;adjustable;die |