摘要: |
针对常用牌号的厌氧胶(如铁锚302、351等)在实际应用过程中影响其固化性能和固化时间的因素进行研究。通过理论分析和实际试验,找到优化固化工艺和缩短厌氧胶固化时间的方法,对固化温度、填充间隙和粘接基材进行分析,研究其对厌氧胶固化因素的影响,找出厌氧胶在不同情况下使用时对应的固化时间和加速固化的可行性工艺方法,对机械行业中厌氧胶的具体应用提供了理论依据和工艺参考。 |
关键词: 厌氧胶;固化时间;加速固化;固化条件 |
基金项目: |
|
Process Analysis of Anaerobic Adhesive Curing Factors |
Shan Chao Jiang Qiankai Liang Rongzhi Guo Fan Huo Lianfeng Song Wei Liu Yan
|
Capital Aerospace Machinery Co., Ltd., Beijing 100076
|
Abstract: |
In the practical application process of commonly used anaerobic adhesives (such as Tiemao No.302, No.351), the factors affecting their curing performance and curing time were studied. Through theoretical analysis and practical experiments, methods were found to optimize the curing process and shorten the curing time of anaerobic adhesive. The curing temperature, filling gap, and bonding substrate were analyzed to study their impact on the curing factors of anaerobic adhesive. The corresponding curing time and feasible process methods for accelerating curing were identified when anaerobic adhesive was used in different situations, providing theoretical basis and process reference for the specific application of anaerobic adhesive in the mechanical industry. |
Key words: anaerobic adhesive;curing time;accelerated curing;curing conditions |