摘要: |
采用正交切削模型建模并仿真定心加工切削过程,利用abaqus软件对不同切削参数下的切削过程进行有限元仿真,然后根据切削力仿真结果力学仿真分析零件加工变形情况,最后通过切削试验验证仿真结果。 |
关键词: 定心加工;有限元仿真;误差分析 |
基金项目: |
|
Application of Finite Element Simulation to Precision Optical Alignment Machining in Opto-Mechanical Parts |
Pan Hao Han Baohui Jiang Xilong
|
Beijing Institute of space Mechanics &Eletricity
|
Abstract: |
In this paper, the orthogonal cutting model is used to simulate the optical alignment machining process in abaqus. The analyzed deformation during processing with different cutting parameters is researched by finite element simulation. A serial of experiments are performed and the rationality of the simulation results is validated. |
Key words: optical alignment machining;finite element simulation;error analysis |